To get quickly the best and an even finish result, the variable drum-speed makes the textiles continuously “fall” directly in front of the unique injector-system, which can inject steam or small quantities of a finish product (choice from 2 tanks).
Finishing products are injected as a fine spray at a high speed for good penetration, which is extra ensured by tumbling in steam. As all finish-product is absorbed by the textiles, there is no waste. Saving up to 40% chemicals.
During drying the air inlet-temperature and the exhaust-temperature are checked. Consumption of heat-energy is low as only little water needs to be evaporated. Cooling before unloading avoids “hot creases” and stabilizes the finishing effects.
Result is a fully relaxed textile with maximum volume and a full, soft handle.
Finishing in a DRUMFINISHER requires only one, automatic machine. Without wet-treatment the production-flow is not only much faster, but also up to 50% lower costs for energy, operations, water and effluent.
No water using in the process.
* No water
* Short process time
* Max. Shrinkage
* Energy saving
* Direct chemical in jeatlon without water
* Direct steam injection
* No need washing and squeezing process
- Aloe Vera,
- and other chemicals